AROMALECTRIC® FD-A5 FRAGRANCE DIFFUSER
- Remove all packaging from diffuser and fragrance oil bottle.
- Remove bottle cap to expose wick. Do not remove wick.
- Do not place oil bottle or cap on finished surfaces as fragrance oil residue may cause discoloration or staining.
- Holding the fragrance oil bottle upright, line up the wick with the center hole of the diffuser. Push the bottle up into place to hear a snap click.
- Wash hands to remove residual oils.
- Plug your AromaLectric® fragrance diffuser into a 120-volt outlet, rotating the plug as needed to keep the diffuser upright.
WARNING: Risk of electrical shock is present if not used properly or 120-volt outlet is not working properly.
- This product is not a toy. For adult use only. Keep out of reach of children and pets.
- Do not install in low lying electrical outlets or traffic areas where unit can be dislodged and bottle unit could leak.
- Do not put fingers or hands into the product while it is plugged in.
- Do not immerse or use near water.
- Use only in areas with at least 12-inch clearance above the product to avoid potential discoloration to surrounding surfaces.
- Do not place oil bottle or cap on finished surfaces as fragrance oil residue may cause discoloration or staining.
AROMALECTRIC® FRAGRANCE OILS
VERSASCENT® ALL FRAGRANCE WARMER
- Identify safe placement of the unit on a tabletop or counter away from low-lying areas children and pets. Always maintain unit in an upright position, on a stable flat surface up and away from low-lying areas and children and pets.
- Lift the latch on the housing to place your favorite scent load. Choose from our no-muss, no-fuss solid Scent Slice®, or Scented Dazzle Drops™, also from Scentual Living by Design®. They can last up to 30 days depending on usage of the unit. VersaScent® All-Fragrance Warmer will also warm waxes, tarts, and fragrance or essential oils.
- Plug the cord into to a properly functioning 120-volt outlet. Select a temperature for your chosen fragrance load using the “Power Level” button on the control cord.
“Low” for solid resin fragrance loads such as Scent Slice®, or Scented Dazzle Drops™
“Medium” or “High” for waxes, tarts, and essential oils.
“High” for fragrance oils.
NOTE: turning unit “Off” when operation is not desired will extend fragrance life. - Choose how long you’d like VersaScent to operate. Press the top button on the control cord using the “Power Timer” button until the desired setting is lit – “4H” or hours, “8H”, “12H” or always “On.”
To replenish the fragrance experience, always allow unit and warming cup to cool before cleaning fragrance residue with a dry paper towel. Used fragrance loads may be safely discarded. - Replace bulb as needed using only 15-watt bulb.
- Place unit on flat surface.
- Do not put fingers or hands into the unit while it is plugged in.
- Do not immerse in or use near water.
- Do not insert metal or any foreign object into any part of this electric scent warmer.
- When in use, do not leave the unit unattended.
- Keep out of reach of children and pets. This product is not a toy.
- Use only in properly functioning 120-volt electrical outlet.
- The heating cup can be hot and may cause burns. Unplug and allow to cool before handling.
SCENTFLOW® DIFFUSION CANDLE
ScentFlow® Diffusion Candle—the total home fragrance relaxation experience of a scented candle without the danger of flame or heat. Nestled inside the beautiful acrylic mercury glass shell with flame-like flickering LED is our unique airflow fan. Its quiet motor accelerates diffusion of the ScentFlow’s resin Scent Slice® Fragrance Disk. Operating on a USB-rechargeable battery, the ScentFlow provides nearly 24 hours of portable diffusion and ambience before recharge is needed.
The Classic Collection features the ScentFlow Diffusion Candle in crystal lake blue or glowing rose gold, and includes a USB cord and one Scent Slice in our signature Vanilla Sugar fragrance.
Inserting the Scent Slice®:
The fragrance experience of the ScentFlow® requires a Scent Slice from Scentual Living by Design®. Remove the packaging and place the center opening of the Scent Slice over the LED bulb as shown in Figure 2. When your ScentFlow unit is no longer producing the fragrance experience you want, simply replace the Scent Slice. Store unused Slice in the purchase container or other sealable container to preserve their fragrance.
Note: For a stronger fragrance experience, two Scent Slices can be used. Combine two different fragrances to create your own custom scent! Scent Slice do not require melting or softening to release their fragrance.
To operate the airflow fan:
Locate the switch under the fan blade icon on the bottom of the ScentFlow.
With a Scent Slice inserted ScentFlow’s fragrance diffusion rate is controlled by the settings on the airflow FAN. See Figure 3.
- In “0” position the fan is in the off mode.
- In position “1” the fan will give 1 minute of scent diffusion every 15 minutes.
- If scent is desired more often, select “2.” The fan will operate for 1 minute every 10 minutes.
- Selecting “3” will operate the fan for 1 minute every 5 minutes.
- Selecting “4” allows the fan to run constantly until another selection is made.
It’s your choice. Try it!
Each time a fan frequency selection is made, the LED will blink (not flicker) to indicate the chosen frequency. One blink for selection “1”, 2 blinks for selection “2”, etc.)
To operate the Flickering LED
Locate the switch under the light bulb icon on the bottom of the ScentFlow.
The Flickering LED settings set the cycle time for the LED to be lit (see Figure 3.)
- In the “0” position, the flickering LED is in the off mode.
- Position “1” sets the flickering LED to run for 4 hours every 24 hours.
- Selecting “2” changes the LED flicker run time to 6 hours every 24 hours.
- Position “3” gives an LED flicker run time of 8 hours every 24 hours.
- Position “4” leaves the LED flicker on constantly until another option is selected, or the power is interrupted.
Each time a Flickering LED timing selection is made, the LED will blink to indicate the chosen setting. One blink for selection “1”, 2 blinks for selection “2”, etc.)
Your safety and satisfaction with our products are very important to us.
WARNING: When using electric products, basic precautions should always be followed:
- Do not put fingers or hands into unit while it is plugged in or inserted into an outlet.
- Do not immerse electrical units in water.
- Do not insert metal or any foreign object into any scent warming products.
- Do not use unit if chipped or cracked.
- Do not leave unit unattended.
- Keep out of reach of children and pets.
- Place away from high traffic or low areas where product can be knocked or bumped.
- Do not place directly under counters or cabinets.
CAUTION: The included USB power supply uses electricity. Risk of electrical shock exists if metal or any other foreign object is inserted into any part of this electric device or it is improperly used.
SCENT SLICE® FRAGRANCE DISK
Lacey colorful cuts of solid fragrance that won’t leak or spill—an easy choice for home fragrance decor. Versatile resin Scent Slice® can be used in potpourri displays and is perfect for use in both the ScentFlow® Diffusion Candle and VersaScent® All-Fragrance Warmer from Scentual Living by Design®. Add two Scent Slices to increase the fragrance experience. Mix and match from our exclusive fragrance varieties to find your own custom aroma. Our Classic Collection features seven refreshing scents: Vanilla Sugar, Siberian Iris, Bergamot Breeze, Iced White Cranberry, Watermelon Sorbet, Lemon Meringue, and Cinnamon & Clove.
Please follow these basic safety guidelines in the handling of any fragrance-bearing products, including Scent Slice® Fragrance Disk. CAUTION: EYE AND SKIN IRRITANT. Fragrance bearing products may contain residues that could irritate eyes and skin. Wash hands after handling. KEEP OUT OF REACH OF CHILDREN AND PETS.
NOTE: Fragrance disks could soften in high temperature devices. For best results, use in warming devices with low or medium temperature settings.
SCENTED DAZZLE DROPS™ FRAGRANCE RESIN GEMS
Scented Dazzle Drops™ are completely no-muss, no-fuss fragrance gems for any type of fragrance-warming diffusion. Delicate aroma combinations are captured in adorable resin shapes for continuous scent release—faster when warmed, slowly when not. Available in all of the Scentual Living by Design® signature fragrances: Vanilla Sugar, Siberian Iris, Bergamot Breeze, Iced White Cranberry, Watermelon Sorbet, Lemon Meringue, and Cinnamon & Clove.
How to use: Place a handful of Scented Dazzle Drops™ into a fragrance warming diffuser or place by the handful in any tabletop display, potpourri pot, or open mesh sachet bag for a heat-less fragrance experience.
Please follow these basic safety guidelines in the handling of any fragrance-bearing products, including Scented Dazzle Drops™ Scented Resin Gems.
CAUTION: EYE AND SKIN IRRITANT. Fragrance bearing products may contain residues that could irritate eyes and skin. Wash hands after handling. KEEP OUT OF REACH OF CHILDREN AND PETS.
NOTE: Fragrance disks could soften in high temperature devices. For best results, use in warming devices with low or medium temperature settings.